Creality K2 Plus hepa and carbon filter box ( added VE2, VE2_83x83, VE2_100x108 )

Box for hepa filter and activated carbon pellets for the Creality K2

The K2 Plus already has a carbon filter installed, but it is only partially filled.
I also wanted to have a hepa filter on the housing and came up with this design. Because the printer in my setup is positioned with the rear facing a wall, access is somewhat difficult. I therefore designed the filter box for use inside the housing. The box replaces the original filter and grill.
The middle part can be filled with activated carbon pellets, a hepa filter is clamped into the front part. The front part is fitted with M3x6 mm screws.

I used hepa filters from Amaz*, which you can buy as a replacement for various Robot Vacuum Cleaners.

The version VE2_83x83 needs two filters with dimensions of 40x80x15 mm (as used in the famous Bento Box).
The version VE2_100x108 needs a filter which is usually used in ILIFE V8 series Robot Vac

(links are non-affiliate links to Amaz* DE, and only as a clarification of the required filter) 

edit 2025-05-10 added VE2_100x108 to support other hepa filter (ILIFE V8s Series)
   - alternative grid (instead of hexagonal) for faster printing
   - reorganised files for download
   - reworked description

edit 2025-04-25 user request: added new front lid design based on the original

edit 2025-04-15 user @FabriceZ has designed a grid insert for the activated carbon tray to better distribute the granules. You can find his add-on here. It is a worthwhile upgrade.

edit 2025-02-05  files are now in the right print orientation when imported to the slicer 
-  renamed folders for better understanding
-  deleted version1 

edit 2025-01-19  adjust size VE2_80x80 front (renamed to VE2_83x83)
- after feedback from a maker I adjusted the front for the Bento Box compatible filters to 83x83mm

edit 2024-12-29   ADDED VERSION 2    VE2
- no heat set inserts required (m3 countersunk screw max. 8mm length)
- lid on the back easier to mount (see my make I posted)
- added the option to snap on a front lid (a thin foam can be inserted too)

ps: it is best NOT to print the parts in bright colour, but in black. I have noticed that otherwise the AI (foreign object detection) could incorrectly identify the parts as foreign objects and pauses the print.

print settings:
printed in ASA with K2 plus , 0.4 nozzle , standard ASA profile , 0.2 mm layer height, 15% infill
print orientation like shown in the slicer picture !
only the two notches on the middle part need support
the clip should be printed very slowly
the pattern of the grill is not very print friendly, but I like the hexagonal look

included STEP files to easy modify
it is up to you to change the pattern or design an adapter for other filters 

happy printing, have fun!

IF THERE ARE ISSUES WITH THE DESIGN PLEASE LEAVE A COMMENT OR SEND ME A MESSAGE