Kitchen Aid Attachments Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These hooks grab the cabinets in my apartment and hold attachments for the Kitchen Aid stand mixer.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I measured the attachment point on my mixer and offset the shaft a little bit for an easy fit while the hangar is attached to the cabinet. I also set the thickness of the hooks "backbone" thin enough for my cabinets to close over them.
The pin a separate piece to make printing easier and to avoid having the pin shear off under load and drop the attachments. It has a flat modelled on it so that it is clocked correctly in the shaft and prints without supports. The pin was a press fit into the hook when I printed these on my MK3S+.
This model does not need supports. I was burning through remnant material, so mine ended up multi color. There is no color change code in the 3mf file that I uploaded.
Models are STP files, so it is easy to adjust these models to fit your application, as cabinet lip dimensions vary.