1 / 3
Dummy 13 500% Dead space Isaac clark led helmet — zdjęcie 1
1 / 3

Dummy 13 500% Dead space Isaac clark led helmet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dead space helmet for dummy 13, 500% with remote control LED.

Ocena
0 / 5
Polubienia
31
Pobrania
45
Wydruki
0
Wyświetlenia
1012
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I saw this wonderful model of Isaac Clark's head, and though that it would look great with some blue lighting, and I've been on a dummy13 kick lately. 
Scaled it to 500% size, cut holes for the dummy neck, added remote control LED lights (found on amazon). These lights are listed at 1.4 inch diameter, .8 height. This model has room for slightly larger ones, YMMV. 

Uses 6x3 magnets (also on amazon) other than that, material should be whatever works for you. I used amazon basics copper, but any type should work. I'm eyeing some bronze PETG.

Mirror the helmet half for each side. I recommend slicing at a 45degree angle. this adds a bit more support material, but moves it away from critical regions. The visor is only print once, I used clear PETG, but i think PLA will work.