Reminder Clock - U.F.O Project Dec 2024
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a clock with a reminder system built in.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 182
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a clock with a reminder system.
More info at https://www.alien3d.us/december-2024-ufo/
UPDATE 1/6/24:
If you have downloaded teh files before 1/6/24 please download them again as they will not be compatible with the clock mechanism in the UFO Box.
It uses an LED to light up one of the bells to remind someone to do something.
There are DIP switches on the back to configure how long the reminder is for.
The first DIP switch is for 1 day, second for 7 days, and third for 30 days.
You should only have one DIP switch selected.
The timer starts as soon as you power on the arduino. Once the the timer is up the LED will turn on. To turn off the LED tap the bell. The light acts similar to an alarm it will turn back on every 24 hours for example no matter when you turn off the light.
Print Instructions:
No parts need support.
Print one of each file included (except the preview 3MF)
To get the face and numbers to be different colors, do a filament swap at layer 16 or 3.2mm height.
Parts needed:
- 1 ESP32 board
- 1 DIP switches with 3 switches
- 1 6MM Push buttons
- 1 5MM LED
- 1 Clock Mechanism
- 2 3x6 M3 screws or can be up to 12mm