MiniDisc 6-disc Book case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A folding case to hold 6 minidiscs!
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
Once again, inspired by something I saw on Reddit - a folding case that holds 4-6 discs.
Modelled from scratch in Fusion 360, this case uses what I think is a very clever mounting system for holding the discs in the cover - a tiny tab that fits into the notches on the corners of a minidisc. It does require a bit of support, but I find Tree supports work very well and are easily removed.
The only other thing you'll require to make this is a pair of 8x3mm magnets, for the latch. The tolerances are pretty tight, and the magnets just press-fit.
The display pics have my personal logo on them, because why not? But the .stl files are blank.
Print two covers, and one spine. Tree supports are recommended. The md_book_spine_tall has taller walls to retain the inner pair of discs.