1 / 3
Maze Tube
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This maze tube is a fun and simple puzzle game. It takes about 6 hours to print and does not require any supports. I recommend cleaning the maze and inside of the tube to prevent dust and debris.
After using the maze for a while, avoid printing the maze with super dark colors (black), as it is difficult to see the marble in low-light conditions.
The tubing around the maze requires a 56 mm inner diameter and a height of 8 inches.
Here is the one I used: https://amzn.to/3BoFAwx
The marble needs to be 5.5 mm in diameter or smaller.
Here is the one I used: https://amzn.to/3VJkzU8