1 / 11
Replica Hornets Needle from Hollow Knight/ Silksong — zdjęcie 1
1 / 11

Replica Hornets Needle from Hollow Knight/ Silksong

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution — Noncommercial

A replica hornets needle from hollow knight.

Parts you'll need:

Tools you'll need:

  • Hacksaw/ Grinder
  • Glue
  • Drill with drill bits

27/10/24 V2: Added m4 rod down the center of the blade to help with strength. Removed the 10mm pin. Added 5mm pin hole on bottom of spear_A and spear_socking.

09/11/24 V2.1: Increased length of pin from 19.5mm to 39.5mm.

14/11/24 V2.2: Changed the pin from a cylinder to a rectangular pin for added strength (diameter of 5.5mm to square of 6mmx6mm). Decreased height of pin from 39.5mm to 18mm and adjusted pin holes in spear parts accordingly. Increased hole for pole in Spear_A and Spear_Socking from 35.5mm to 36mm as it was a bit tight.

22/11/24 : Increased the flange on thread_a from 3mm high to 10mm to account for non straight cuts of the wooden pole.

24/11/24 V2.3: Increased height of any pin hole on the bottom of parts from 10mm to 13mm. Took 85mm off the top of the blade as it was too thin and weak.

Category: Props

Tagi