4 Inch Speaker Extended Range Driver Pods
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4 inch Speaker Driver Pods
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 252
- Wydruki
- 0
- Wyświetlenia
- 1685
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
This is a Hexibase original model I modified to make printable with no supports. I split it at the face right at the start of the chamfer so it should hide itself pretty well. I printed in a contrasting color for the look i was going for. Will need to Glue/Epoxy the face to the body. I added a tongue and groove with room to spare in case of any sagging from bridging. The alt 6 screw file has face inserts that can be glued in (as seen in picture.) I did the inserts in Marble PLA. The body was printed in Bambu Grey PETG HF and face in Elegoo Rapid black PETG.
Original File - Fits this 3.5inch Dayton Audio Speaker (4 screws)
Alt File - Fits this 4inch Dayton Audio Speaker (6 screws)
-Cheers-