easy printable Pistachio/Peanuts/Seed (sorting) bowl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a sorting bowl for seeds and shells
- Ocena
- 4,684 / 5
- Polubienia
- 276
- Pobrania
- 1536
- Wydruki
- 18
- Wyświetlenia
- 6628
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I tried a few bowls, and decided to design my own.
This one needs no supports.
I printed this model in the pictures with PLA Linden (Prusament wood PLA) and the "fuzzy-skin" effect
My print settings (bowl from image):
Layer height: 0.20 mm
Profile: Structural
Material: PLA wood
Infill: Gyroid 20%
Fuzzy Skin: 0,3 / 0,8
Update 01/25: Make the lid easier to print and better fit on the top part with a phase on the edge.
Update 02/25: The user strjan made a nice lid with an insert handle. The file is named lid_handle2.stl and you will find it here.
Update 02/25: I did a repair of the bottom part. Some slicer had problems.
I was inspired by this design: ...another Pistachio/Pea