Chirstmas Tree Train Support (Parametric source available)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The ultimate tree decoration, a train going round and round... Open fusion and adjust parameters to your tree and train.
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 1066
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution
I made this parametric model for my son, daughter-in-law and grandson to “fly” a model train around his Christmas Tree. This was designed for a Joeuf model train with an approximately 70cm diameter circular track.
Printed parts:
- 1x core part (screw part)
- 1x code part (nut part)
- 4x support parts
Non-printed parts:
- 4x 8mm aluminium square profiles (35cm in length, in the current configuration)
- 4x screws and nuts for the core
- 8x screws to secure the track to the support
- 70cm round plywood track floor (in the fusion model, not printed)
Explore the fusion model and adjust the measures (Modify → Change Parameters) of the track diameter and the size of the core element (e.g. size of tree section where to place the support, height at which the train should be located).