1 / 12
Aeon Trespass Odyssey - Cycle 4 and 5 expansion Full Insert — zdjęcie 1
1 / 12

Aeon Trespass Odyssey - Cycle 4 and 5 expansion Full Insert

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Digital download for 3D printing of an insert for the Cycle 4 and Cycle 5 expansion of Aeon Trespass: Odyssey

Ocena
0 / 5
Polubienia
13
Wydruki
0
Wyświetlenia
2203
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Standard Digital File License

These are digital files for a complete insert for the Cycle 4-5 expansion of game Aeon Trespass: Odyssey.

I believe this is the best insert design out there for this beast of a game. It is not only an insert, but an amazing tool to help keep things organized as you play, and to make getting to the table and back to the box quick and easy.

Included in this download:

  • 3mf multi-body files for multicolor printing (Prusa MMU/XL, Bambu AMS).

  • STL files for single color printing.

    • (these files are not updated from v1.13)

  • STL files for many dividers (32 different!) and alternate trays (for storing 2 minis).

  • Complete PDF guide.

  • Print files for MK3S (mono), MK4S (mono), XL (color), with colors set up. 

    • 3mf files for Prusa slicer: MUST use Prusa Slicer 2.9 multi-bed feature. If you use my print files do adjust Filament profile using Prusament PLA default. 

    • G-codes for MK4S mono and XL multi-color.

These files have gone through multiple revisions, and I consider it now final. Besides my own prints, it has been printed by others on the ATO discord community and group reports no problems. Any updates or enhancements (as I change my inserts continuously with people's feedback) will be published here. 

The files have been tested with both 0.4 nozzle and 0.6 nozzles. 0.4 nozzle will give you sharper details, but 0.6 will print much faster and detail will be ok (see photos). 

Complete details in the PDF guide file. Check here a 1 page, ‘Quick Reference Guide’, of how to put all the trays in the box.

Detailed photo gallery here.

Print takes:

  • Approx 1300 grams of filament

  • 7 print beds on MK machines… plus 5 for dividers.

  • 3 print beds on XL… plus 2 for dividers.

  • Roughly:

    • Mono color 36 hours on MK3S with 0.6 nozzle, 0.4 draft.

    • Mono color 36 hours on MK4S with 0.4 nozzle, 0.25 speed.

    • Mono color 26 hours on MK4S with 0.6 nozzle, 0.32 speed. 

    • Color 30 hours on XL with 0.6 nozzle, 0.25 speed. (recommended)

    • Color 25 hours on XL with 0.6 nozzle, 0.32 speed.

    • Color 43 hours on XL with 0.4 nozzle, 0.20 speed.

    • Plus 4-5 hours for dividers.

Description from my Etsy ad:

Everything needed to organize the expansion box components - and more. You get 22 trays plus 32 dividers to fully organize the game - check my pictures. This is based on the previous insert I offered and follows a similar design philosophy, but applies lessons learnt making the insert better. It features:
✔ 17 Trays for all game components.
✔ Extra tray to hold all of the game's Kratos tokens!
✔ 5 'filler' trays, sized to hold Mini cards.
✔ 32 dividers to help you clearly organize all.
✔ All trays are clearly labelled either on the inside or on the sides.
✔ No lid lift.
✔ Maintains the game's original mini trays to protect them the best.

As always, functional:
👉 One tray for all C4-5 voyage (story, adventure) tokens.
👉 One tray for all C4-5 battle tokens.
👉 One tray for ALL Kratos tokens (including C123).
👉 All tokens separate and visible. 
👉 For each cycle, as before: One L tray for general Cycle cards, one tray for the 3 primordials.
👉 Separate trays for each cycle's map cards, for adversaries.

Sleeves: 
📌Will fit 100 micron sleeves for ALL shuffled decks
📌Most other decks can be sleeved... but impossible to find space for all. You can sleeve everything except Technologies and Items/Gear.
📌If you want to sleeve all decks (especially items), the 'filler trays' can be printed instead as 'spill over' space for mini cards that do not fit in the L trays. This should fit all cards sleeved.
📌Included with update 1.07 - new less tall Large Cards trays allows to add 3 standard card trays and 2 mini cards trays - this should allow sleeving all cards!

Options:
🏷 Filler trays 4-5 can be replaced with a tray for 2 Titan minis, or a specific tray to hold Talespinner and ????? Titans (these are Titans which can be unlocked in the campaign and their minis are offered separately on ITU's shop - they have no space in the game's inserts).

 

Update 2024.12.19 - 1.06: 

  • Added empty extra trays in Alternate folder (and to document). Requested by a buyer. Replaces extra trays with spaces for mini cards (this will also print slightly faster).

Update 2024.12.23 - 1.07:

  • Change text in ALL color trays to relief. The embossed was, under certain print conditions didn’t look ok (you would have bands around relief. Relief prints much better and is more visible. Images in document have not been updated.

  • Received requests for supporting sleeving all cards. It is difficult to find space. The Large Card tray was too large, used the space to add 3 Standard cards trays and 2 Mini cards trays. 

    • According to my calculations this will be enough to sleeve everything with 60 micron sleeves (and potentially 100 micron). I cannot test as I don’t have the sleeves, but am potentially sure about this working and someone from discord is going to test.

    • If you have already printed the insert, you only need to reprint Large Cards part and the new trays. 

    • Added section to  Alternate describing. 

  • Added bonus section – Alternate trays for C123 insert, to replace map tray with 3 Mini cards decks.

    • Someone sleeving all cards, and owning the Lux Tiles, was storing his mini cards in the map tray. I designed this for him so he has storage build for his mini cards. This print has not been tested. 

Update 2024.12.30 - 1.08:

  • The Midas/Pain drawer was too deep – it did not sit flush with the Conditions box. It has been reduced a bit in size. I also made some small adjustments to the Conditions box so the drawer sits better in place. Another couple of small adjustments were made: a small defect with the guides for the drawer being too long was fixed, and the supports in the back for color printing on the face were fixed.

    • A reprint is not necessary. If at all, reprint the drawer. 

    • Changed models: Midas Pain Drawer and Conditions (both 3mf and STL versions).

  • Changed text and logos in all mono trays for relieve instead of embedded. This prints much better especially at higher speed printers (with input shaping). 

    • All STL files with text are affected, no need to reprint if you are happy with the embedded ones.

  • Reduced chamfers in token trays – I did this to save material, but it’s close to nothing and makes print more difficult for first layer adhesion. 

  • Fixed text in mini slot for mono Various tray.

Update 2025.01.03 - 1.09:

  • Mono version had a few files were text was debossed (embedded) and not embossed (relief). Corrected. Affected files: Mono - Cycle 5 - L Tray Tall.stl, Mono - Secret Y.stl, Mono - Tokens Tray - Battle.stl, Mono - Cycle 4 - Primordials.stl. Reviewed all files to make sure the style is now consistent among all. 

Update 2025.01.13 - 1.10:

  • Small fix. Cycle 4 - L Tray Tall.3mf, Tarot text on one side was still debossed, when rest of text in all parts are debossed. Fixed. This doesn’t require a reprint of the part if this doesn’t bother you. Mono part was correct. 

  • Small fix. Various Tray (both 3mf and STL) has label Secrets 16. Right label is Secrets 14. Everything was ok here in the document, not in the files!

  • Added slicing instructions for multicolor Prusa and Bambu printing.

Update 1.11:

  • Some people were finding it difficult to color dividers. I do it with modifiers in my slicer or filament changes at a specific layer. I have created multi-part versions of the dividers with one part for the background color. Added text explanations to print instructions.

Update 2025.02.15 - 1.12:

  • Added Cipher label to Cycle IV tray.

  • Changed Strains divider to ‘Strains Patterns’.

  • Added 1 sheet Quick Reference Guide (so you can print it and store it with insert for the steps to store).

Update 2025.04.24 - 1.13:

  • A few of the labels where at a slight angle from being horizontal or vertical. Especially visible.

    • No reprint needed – most people had not noticed this!

  • From this release I will not update the mono version. This is double the work for me and I think everyone should be ok with 3mf. Please let me know if not

Update 2024.08:

  • Some files were missing: 2 on 3mf folder (conditions and battle tokens) and a multipart divider (strains) had no text. This is now fixed, both on printables as well as the zip file. Thanks to the buyer who let me know!

     

Tagi