Powerblock Stand Added Weight Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"Stiffens" up the adder weight holder so they are more upright and secure, rather than loose and wobbly.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution
This fits in the official “cheap” Powerblock compact stand: “PowerBlock Large Compact Stand, Dumbbell Rack & Weight Rack” on Amazon.
The adder weights were too wobbly for me in this stand and it was annoying the hell out of me. This inserts into the back/top of the rectangular section and slides into the hollow area to add some counter force to keep them standing up straight. I used a spare ¼" self tapping screw that you might use on your gutters for example. I drilled in from the top, pretty easily, with some measuring you could probably go from the bottom if you wanted as well.
NOTE: I used 1mm spacers to fine tune the wobbliness. 4x of the spacers worked fine for me, more spacers = more wobble. The _no_spacer version is equivalent to using 4x spacers (not tested).