ECAS Bowden Retainer for Voron 2.4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Voron 2 Bowden Retainer remix with sockets for press fit ECAS clamps
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 440
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This Bowden Retainer allows for installation of two ECAS clamps on either face. This creates a strong positive retention if you join two Bowden tubes at your retainer.
I print with my spools in a dry box and a Bowden tube feeding out of it into the printer. I had been running the tubes together into the Voron Design retainer and hoping for the best as I thread filament through. After adding ArmoredTurtle's Filatector to my filament line, there was enough resistance that on every filament swap the tubes would pop out of the retainer.
I modified the Voron 2 retainer to accept ECAS clamps press fit into the ends. This accepts two ECAS04 couplers in either end, and then I feed the two tubes in to bottom out. Now my lines don't pop out of the retainer when resistance is encountered on feed.