1 / 4
Wall Mountable Vinyl Roll Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple yet elegant solution to storing Vinyl rolls on walls in your workspace.
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 543
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (44)Powiązane
I designed this after a request from my wife to have something to store her vinyl rolls she uses for making t-shirts. Her requirements were pretty basic, she just needed something that she could hang from the wall. I took a modular approach to this idea to ensure the print could fit easily on my printer and also to allow for possible expansion / reduction as her inventory fluctuates.
Top Section
- Has mounting holes on the top
- Has 2 circular hook catches at the bottom for hanging additional sections
Middle Section
- Has 2 hooks at the top for attaching to upper section
- Has 2 circular hook catches at the bottom for handing additional sections
Bottom Section
- Has 2 hooks at the top for attaching to upper section
Printer Settings
Below are the printer settings I used when making this
- Quality
- Layer Height: 0.2mm
- Walls
- Wall Thickness: 0.8mm
- Wall Line Count: 2
- Horizontal Expansion 0.0mm
- Infill
- Infill Density: 20%
- Infill Pattern: Cubic
- Support
- Generate Support: Checked
- Support Placement: Touching Buildplate
- Support Overhang Angle: 80.0
How I Designed This
