Oregon Ducks Inlay - Every Day Dice Carry (EDDC) Box with dice key
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an Oregon Ducks inlay remix of the Every Day Dice Carry (EDDC) Box with dice key
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Share Alike
This print uses 0.20 mm layer inlay with single extruder multi material setup.
1. Go to Printers > Capabilities > Extruders
2. Select 2 extruders and check Single Extruder Multi Materials
3. Go to Print Settings > Wipe Tower
4. Go to Printers > Custom G-code > Tool change G-code
5. Insert the following into the area
{if layer_num >= 0}G0 X0 Y0M600 ; change to filament for extruder {next_extruder + 1}{endif}
6. Go to Print Settings > Wipe tower
7. Uncheck Enable
8. Split the model into parts
9. Select the extuder for each part
10. Print the parts in separate colors