Wall-Mounted Nespresso Capsule Dispenser optimized
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular wall-mountable rail that holds Nespresso-compatible capsules
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a very slight tweak of the original that only prevents multiple capsules from sliding out at once and I shortened the middle track to make it printable with my smaller machine. All the rest is the same. Use the other parts from the original model.
Vertical wall-mounted Nespresso capsule dispenser. Each rail piece holds 5-6 capsules, depending how you count them. Modular. Designed to be nailed to a wall.
The pieces are intended to be printed in the provided orientations. Supports are needed only in the middle of the overhang of the dovetail slots (see if the .3mf files work for you)
Assembly:
- Print one bottom, one top, one connector and any number of rail pieces
- Slot pieces together (the connector is intended for the bottom piece)
- Nail the holder to the wall using the holes in the dovetail connectors (I recommend nailing at least the topmost and bottom-most ends, but more nails may be needed in the middle for longer rails.)
Caution: While the model works fine with prusaslicer, it contains elements (like open meshes, intersecting shells or double vertices) that may cause errors in other slicers