BitBot XL frame 2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of: BitBot XL frame made by Hanskbe. For building and gluing on a BitBot, without destroying the robot.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
The BitBot XL Frame, originally designed by Hanskbe, was created as a versatile frame for students to build and glue components onto a BitBot without damaging the robot itself.
The BitBot XL Frame 2.0 is a refined remix of the original, redesigned for easier 3D printing and improved compatibility with additional components, such as an Servo Insert frame for a 9g servo.
The front holes have a diameter of 5 mm, while the rear holes measure 4 mm.
All holes are 13.5 mm deep
Photos and Links to complementary parts will be available soon.