Faszien Massage Adapter / fascia massage adapter - BlackRollBooster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
1,23 € – 1,50 € netto (bez VAT)
Dla pliku: 20241216_Gewindeadapter_0.4n_0.2mm_ASA_MK4S_46m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,37 € netto (środek widełek).
- Masa podana przez autora
- 14 g
- Czas druku podany przez autora
- 46,2 min
- Materiał u źródła
- ASA
- Materiał wyceny
- ASA
- Drukarka wyceny
- Bambu Lab X1 Carbon - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
BlackRoll Booster Head mod for 3D printing
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modelle für den BlackRoll Booster um diesen als Massagestab zu nutzen. Inspiriert vom Original BlackRoll Booster Head habe ich ein Version erstellt, die für den 3D Druck optimiert ist.
Unten findet Ihr die Daten für einen Adapter, einen Gewindebolzen sowie den Massagestopfen selbst.
Gedruckt wurde alles im Modus 0,2mm Structural:
- Adapter in ASA mit etwas Stützmaterial in den seitlichen Gewinden
- Gewindebolzen in ASA mit Stützmaterial für den umlaufenden Sechskant
- Stopfen aus TPU ohne Stützmaterial
Mit den gewählten Einstellungen für den Stopfen ist er relativ weich geworden. Ich denke die Härte des Stopfens kann durch Einstellungen im Slicer (Perimeter, Infill Struktur und Menge, etc. ) sowie durch die Materialhärte selbst eingestellt werden.
Viel Spaß beim Drucken! Wenn Euch das Modell gefällt würde ich mich über ein like freuen.
Models for the BlackRoll Booster to use as a massage stick. Inspired by the original BlackRoll Booster Head, I created a version that is optimized for 3D printing.
Below you will find the data for an adapter, a threaded bolt and the massage plug itself.
Everything was printed in 0.2mm Structural mode:
Adapter in ASA with some support material in the side threads
Threaded bolt in ASA with support material for the surrounding hexagon
Plug made of TPU without support material
With the settings selected for the plug, it turned out relatively soft. I think the hardness of the plug can be adjusted by settings in the slicer (perimeter, infill structure and quantity, etc.) as well as by the material hardness itself.
Have fun printing! If you like the model, I would be happy if you leave me a like.