Klipper Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Klipper Controller / Case for Raspberry Pi 5 + Pimoroni NVME Base + pushbutton+ 2.42 OLED + Rotary Encoder.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Case for Raspberry Pi 5 + Pimoroni NVME Base + pushbutton+ 2.42 OLED + Rotary Encoder.
addons:
knob for 6mm shaft encoder
adapter for 8.5 mm square momentary pushbutton with 6x7mm knob from aliexpress (Non-Self-Locking Switch 8.5X8.5MM)
Raspberry pi 5.
Pimoroni NVME Base (https://shop.pimoroni.com/products/nvme-base?variant=41219587178579)
Aliexpress:
2.42 OLED 128x64 display I2C ( “2.42 Inch 128x64 OLED LCD Display Module SSD1309 12864 4 Pin IIC I2C” )
EC11 Rotary encoder. (KY-040)
16mm Momentary Push Button w. LED. ("16mm Metal Push Button Switch")
Please Note:
I use active raspberry pi cooler (https://www.raspberrypi.com/products/active-cooler/)
There is no external access to the MicroSD card reader on the Pi - I don't use it.
The lid is only fastened using gravity and possibly friction of the 8 tabs - I prefer the easy access.
Caution: Use a short 16mm pushbutton. The nvme PCB only leaves 9mm space for it inside the case. (or use the adapter with a glued in 8.5mm square switch).
FWIW, Here's my novice OnShape 3D design. In case you want modify something.
******************************************************************************
I watched this video on how to connect the OLED, Encoder and powerswitch to the Pi