Christmas Tree Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stand generator (OpenSCAD) designed to fit trees made by @abekabakoff. 🎄
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 307
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction
This OpenSCAD file is designed to generate a stand for your Christmas tree generated by the file provided by @abekabakoff.
This is therefore not a redesign of the original tree but rather a nice add-on. :)
I have made 6 different stands, which is set in the file…
How to generate a stand?
Just open the OpenSCAD file and enter the exact same settings as with the generated tree. Then set the desired stand type and an appropriate offset (standard works on my K1).
These are the different types:
0 = Simple cross with round corners
1 = Double cross with round corners
2 = Cone
3 = 5-point star
4 = 4-point star
5 = 8-point star
Files…
- Christmas Tree Stand (OpenSCAD) - The file that generates a stand for you :)
- ExampleStand_Type5.stl - Example stand that fits the provided example tree.
- ExampleTree.stl - Example tree. 0.2 initial layer height. 0.3 layer height. 0.6 perimeter width.
Merry Christmas and happy printing! 🎄
Feel free to ask any questions, post a comment, leave a like and make :D
Merry Christmas!