1 / 5
Skådis Connector Plate for Home Assistant Voice PE — zdjęcie 1
1 / 5

Skådis Connector Plate for Home Assistant Voice PE

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small plate that connects the Home Assistant Voice Preview Edition to a Skådis® board

Ocena
5 / 5
Polubienia
26
Pobrania
118
Wydruki
2
Wyświetlenia
1056
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Share Alike

Small plate that connects to the Home Assistant Voice Preview Edition feet on the one side and to a Skådis® board on the other

There's a version without and with a simple reflector for sound (as after attaching it to the wall, the speaker would be facing upwards).

Works with PLA, but PETG connects a slight bit better to the VPE. I assume, ABS would connect even better. Again: PLA works as well, as the VPE isn't particularly heavy and there are no bigger forces applied 😅.

Last, but not least: Except for the sound reflector, this thing is completely hidden, so print in any color you have some filament leftovers of…

See also the Honeycomb Connector Plate

Tagi