BMW i3 center console organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
keeps your smartphone separated from other stuff in the small storage-compartment below the armrest of an BMW i3.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 959
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recommend to print 'Body' in PETG - in the car PLA might deform during summer heat. Print-settings for ‘Body’ are not critical - I even used 0.6mm HF nozzle with 0.32mm layers and variable layer hight in Prusaslicer and the outcome was acceptable.
Pad1 + Pad2 are optional. Use flexible material like TPU. Use thin layers like 0.15mm as TPU otherwise might have issues with the overhangs.
If you own a Prusa XL use the multimaterial version to print as a single object (MMU is not sufficient as it does not support flexible filaments)
EDIT (12/22/2024):
- adjusted body and pad1 to eliminate horizontal overhangs
- add multimaterial version (to be printed on e.g. Prusa XL)