Bluetooth Shutter Mount for Neptune 3 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For setting up Timelapse using a Bluetooth shutter.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model helps attaching a Bluetooth shutter to the X axis of the Elegoo Neptune 3 Pro. By using the gcode modifier for timelapse in Cura, one can create cool timelapses of prints without the printhead obstructing the view.
An additional part will be needed for actuating the shutter, which I'm planning to design and upload soon.
Recommended Print Settings
Orientation : same as in the model
0.4mm Nozzle
0.2mm layer
Use 3 walls and at least 30% infill
Supports needed
Mounting
The part can be mounted using the screw in the x axis belt adjust kit, as shown in images.
If you like the model, please like, rate it and upload makes ( Help me get some prusameters ;) )
Please feel free to remix and create better versions if possible. step file is added.