"Quiet Please and I mean it"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Encases a length of 42x19mm pine for structure. And heft. Used as a prop for a dress-up party.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
Apparently on the pro-golf circuit, these are used to hush crowds? 🤷This one is a bit more heavy-duty though…
My partner had a dress-up party for work as a golfer. Excellent opportunity to make a big old novelty prop. Had to slice it into 4 sections to fit it on the bed.
You'll need a tiny amount of support material for the bridge on the “Side Panel Bottom” piece but otherwise, just a mallet and some short 3mm wood screws. Be better than me and don't forget the handle should have the holes on the back 🤦
You can cut the length of 42mm x 19mm pine to 655mm and it should fit VERY snuggly.
Or 1 21/32" by ¾" by 2 foot 1 25/32" if you want to measure in barleycorns.