Caution Cat Puke (Approximately 8"/200mm tall)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AMS NEEDED, but not required if you know how to print multi-color without AMS Minimum 220mm x 220mm bed needed.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 125
- Wydruki
- 2
- Wyświetlenia
- 469
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
AMS NEEDED, but not required if you know how to print multi-color without AMS
Minimum 220mm x 220mm bed needed.
Cat Puke Sign 3MF is all four plates in Bambu Studio
Cat Puke Left Sign, Right Sign, Sign Pin, Sign Plug are the individual files. I included the 3MF for the Left and Right signs along with the STL files
You shouldn't need supports but painting tree supports in the upper portion of the Sign Pin holes will prevent any heat sagging. I have printed with and without supports just fine.
The "Sign Pin" should be printed vertically using a brim and around 25% infill in order to keep it as round as possible.
If you want the blank version so you can add your own graphics, or stickers, you can get it from my Makerworld account but I would like you to credit me for the blank design. https://makerworld.com/en/models/891096#profileId-847623