Spacer for coil (solves intermittent charging issue with some wireless chargers)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought some cheap wireless chargers that only work when there is a small gap introduced. This model adds that gap
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This model fits over the top of the main wireless charging coil, introducing a 2.5mm gap between the coil and the phone. This distance was necessary with the coils I bought. Without adding this gap, the charging coil rapidly connected and disconnected from the phone. With the gap, it charges reliably. The coils I bought are probably just junk, but if you also bought junk coils, this model might solve your problem!
I recommend printing with TPU, that way it also adds a nice cushion for the phone to hit when you place it in the dock.