Crutch holder with magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The crutches can be leaned on anywhere without falling over.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The holders are glued on with hot glue, then drilled through the existing holes and the holder is secured with 3 mm PT screws (or other self-tapping screws). Remove any protruding screws on the inside with a Dremel and sand down.
Magnet and opposite a steel plate with hole and countersink. Or two magnets, but then pay attention to north pole/south pole. There are three types of magnetization: Radial, axial and transversal.
https://www.magnet-shop.net/lexikon/magnetisierungsrichtung---wie-sind-die-magnete-magnetisiert
I bought two magnets with the south pole at the front and two magnets with the north pole at the front.
Loosen the crutches from each other by turning and tilting:
Instead of the magnets, you can also glue on rubber buffers so that the crutches can be leaned against the wall individually.
Translated with DeepL.com (free version)