Drill bit holder 1-10mm with drawer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drill bit holder with drawer for 1-10mm drill bits (0,5mm increments)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Drill bit holder with drawer for 1-10mm drill bits (0,5mm increments)
Top part is an independent stand and the rest is just a drawer parts.
To connect top part with bottom drawer you need 4 pcs M3x8-20mm screws. Holes needs to be
threaded with a tap or M3 screw.
Drawer with locking tabs has locking mechanism that requires cleaning support after printing.
After cleaning, at firts drawer will be little hard to push on place but after few openings will run smooth.
Files contains also version without locking tabs
Supported drill bits sizes:
- 1mm
- 1,5mm
- 2mm
- 2,5mm
- 3mm
- 3,5mm
- 4mm
- 4,5mm
- 5mm
- 5,5mm
- 6mm
- 6,5mm
- 7mm
- 7,5mm
- 8mm
- 8,5mm
- 9mm
- 9,5mm
- 10mm