Irish Flute / Low Whistle wall stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand to store an Irish flute or Low Whistle on the wall
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
A simple stand to hold your flute or whistle on the wall. This compliments the Axianov Irish Flute and Low D Tin Whistle.
The flute stand has the same post diameter as the other stand model on Printables in 2024.
The whistle stand has an 18mm diameter post.
Making A Cushion
I work from home, and I like to practice for a minute or two while waiting for jobs to finish. Because this stand mounts the flute vertically, moisture will drain out the end. Rather than run a swab through it 20 times a day, I thought I'd try letting the flute drain into a cushion.
I knitted a little swatch out of yellow cotton yarn, and wrapped it around the base. You can see it in some of the photos I uploaded. A cutout of a kitchen sponge, or scrap cut from old clothing would work, too. I just enjoy knitting :)
This is probably a bad idea if you live in a high-humidity climate. It rarely goes over 30% humidity where I live, so any moisture captured by the cushion evaporates quickly.
Mounting
I added countersink holes for #6 wood screws, but for the time being I'm just using a size medium 3M Command Strip.
If the strip fails, I'll try to put the screws in the wall without the stand first, then unscrew them and re-use the holes to mount the stand. This way, the screws will go in with less force, making it easier to drive them in straight with the screwdriver at an angle.