1 / 1
LEGO like dynamite scale 10:1
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to be able to do different colors on the dynamite and print it without any supports. So I made a re-design in three parts. The dynamite stick has an overhang that fits with notches on the band. It's a nice fit and stays together with a drop of superglue on the top face of each of the three overhangs. The fuse also goes in with superglue.
Prints without support. Fuse and band prints upside down.
I printed using 0.20 STRUCTURAL and 15 % infill on my MK4S, and there result is very nice.