Dutch houses 1:87 H0 scale - Nijverheid 1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dutch working class neighborhood with a century old houses in 1:87 H0 scale intended for a model train scene.
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 180
- Wydruki
- 0
- Wyświetlenia
- 731
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a set of a century old Dutch working class terraced houses I created in 1:87 H0 scale intended for a model train scene.
The model is best printed with a 0.25mm nozzle.
I printed the parts in the following batches:
Batch 1 - Walls and chimney. 0.25mm nozzle 0.15mm layers.
- Nijverheid 1 Front Wall.stl
- Nijverheid 1 Back Wall.stl
- 2 x Nijverheid 1 Side Wall.stl
- Nijverheid 1 Chimney.stl
Batch 2 - Roof. 0.25mm nozzle 0.15mm layers.
- Nijverheid 1 Roof front side.stl
- Nijverheid 1 Roof back side.stl
- 2 x Nijverheid 1 Roof ridge 95.75.stl
Batch 3 - First floor and roofgutter. 0.25mm nozzle 0.15mm layers.
- Nijverheid 1 First floor and roofgutter.stl
Batch 4 - Doors, Windows and Loft conversions. 0.25mm nozzle 0.15mm layers
- 2 x Nijverheid 1 Front door left.stl - This is for the leftmost house seen from the front and the second from the right.
- 2 x Nijverheid 1 Front door right.stl - This is for the rightmost house seen from the front and the second from the left.
- 2 x Nijverheid 1 Kitchen door left.stl - This is for the leftmost house seen from the back and the second from the right.
- 2 x Nijverheid 1 Kitchen door right.stl - This is for the rightmost house seen from the back and the second from the left.
- 4 x Nijverheid 1 Kitchen window.stl
- 4 x Nijverheid 1 Window back side.stl
- 4 x Nijverheid 1 Window front side.stl
- Nijverheid 1 Loft conversion back side.stl
- 2 x Nijverheid 1 Loft conversion front side.stl
- Nijverheid 1 Window loft conversion back side.stl
- 2 x Nijverheid 1 Window loft conversion front side.stl
- 4 x Nijverheid 1 Window side wall.stl
Batch 5 - Floors and Interior walls 0.40mm nozzle 0.20mm layers
- Nijverheid 1 Floors.stl
- Nijverheid 1 Interior wall downstairs.stl
- Nijverheid 1 Interior wall upstairs.stl
- 2 x Nijverheid 1 Interior wall full height.stl
Building the model:
1. Place the four walls together around the 'Floors' part. Place the 'Interior wall downstairs' part in the middle between house 2 and 3.
2. Place the 'Interior wall full height' parts between the houses 1-2 and 3-4.
Use the 'First floor and roofgutter' part to correctly align the walls (Do not glue the 'First floor and roofgutter' part for easy access later).
3. Place the doors and windows in the appropriate places. Mind the correct orientation of the doors (see photos).
4. Put the roof together. The 'Interior wall upstairs' is placed on the inside EXACTLY in the middle of the roof to strengthen the construction.
The chimney is placed in the middle on top of the roof and the roof ridges are placed on each side of the chimney on the top of the roof.
5. Place the windows in the loft conversions. Mind the correct orientation of whe windows (see photos). Place the loft conversions on the roof.
6. Place the roof on the houses. (Do not glue the roof on the house for easy access later).
Happy printing.