1 / 3
Tripod Spreader/Center Tray for Celestron AVX (and other similar tripods with 2" legs) Tripod — zdjęcie 1
1 / 3

Tripod Spreader/Center Tray for Celestron AVX (and other similar tripods with 2" legs) Tripod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a replacement for the Tripod Spreader/Center Tray for the Celestron AVX Tripod.

Ocena
0 / 5
Polubienia
0
Pobrania
48
Wydruki
0
Wyświetlenia
412
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

After trying to buy a replacement spreader/center tray from Celestron and failing, I modeled a replacement and printed one to see how it worked. Perhaps I went overboard on everything (8 walls, 8 top/bottom shells, 60% gyroid infill, carbon fiber reinforced ABS), but I was shocked by how strong and capable it ended up being.

There are 2 sizes: One that JUST squeezes under the max print size for the Prusa MK3S, and another in the event you want something a little larger and can accomodate a 260mm x 300mm print size.

The center hole is sized for up to a 10mm center rod.

Tagi