Melissa & Doug Spill-Proof Paint Cup Filter Screen and Mag Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Melissa & Doug Spill-Proof Paint Cup Screen and Mag Base for use with Metal Cutting Fluid
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Melissa & Doug Spill-Proof Paint Cup Filter Screen and Mag Base
I use these cups for machine coolant/ tapping fluid/ cutting fluid, etc. The magnets are strong enough I can place these horizontal on a machine tool and I have no worry about it falling off.
MAGNETIC Coolant Jar Base
Printed in PETG. I used black potting or casting epoxy to secure the base to the cup. Ensure it is resistant to oil and solvents. Prep your surfaces with an abrasive paper. This gives you an hour of work time with the adhesive, at least the one I used. There are vents in the model to push out excess epoxy. Its a tight fit and matches the draft angle of the cup. Weight it down overnight to cure.
Neodymium magnets: 0.47 x 0.12 inch (12mm x 3mm)
I recommend doing the assembly on a steel plate and gluing them down individually. The magnets are strong enough to fly out of their sockets and make life difficult. Ensure your polarity is all the same.
A mod to print over the magnets may be a good idea. A steel bed would likely be needed though, I didn't have one when I made this. The magnets will fly.
Coolant Jar Screen
Clear PLA
This is a solid model. Print without a top and bottom layer to expose the infill you wish. I used Triangle at 60% infill. (I think, its been a while.) Adjust your infill % to get the screen density you want.