Creality K2 Plus Rear Poop Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Creality K2 Plus Rear Poop Bin to manage the filament purge waist.
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 307
- Wydruki
- 1
- Wyświetlenia
- 3404
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi everyone, I’ve designed a K2 Plus Poop Bin that meets my needs and am making it available to anyone who can use it.
The bin is magnetically attached to the back and has a support plate that can be secured underneath the bin with 2 sided tape to prevent it from sliding down due to heavy vibration and shaking.
I’ve designed four sizes in total: 75mm, 100mm, 125mm, and 150mm in depth. Each size uses five 25x2mm magnets on either the inside or outside, depending on your preference.
Updated - Jan/14/2025 - It has been brought to my attention that the support bracket obscures the serial number, and in some instances the double-sided tape used for securing it was detaching, causing the poop bin to slide down. I have redesigned the support as a stand that extends to the table and is magnetically attached for quick removal, thereby providing access to the serial number on the K2 Plus. I've also redesigned a V2 of the poop bin and stand to mirror the right side to further clear the serial number if you should wish.
Please don't forget to leave a like, Thanks!