1 / 10
Box für Nikon AM-1 Filmspulen ohne Behälter; Box for Nikon AM-1 film spools without container — zdjęcie 1
1 / 10

Box für Nikon AM-1 Filmspulen ohne Behälter; Box for Nikon AM-1 film spools without container

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Box für Nikon AM-1 Filmspulen ohne Behälter; Box for Nikon AM-1 film spools without container

Ocena
0 / 5
Polubienia
1
Pobrania
15
Wydruki
0
Wyświetlenia
144
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Box für die nachladbaren Filmspulen Nikon AM-1 und / oder für die Nikon F Filmspulen ohne deren Behälter. 
Die Innengröße der Box ist entsprechend dimensioniert um sie mit Velour (DC-Fix Velour) auszukleiden, damit die Filmspulen nicht klappern oder abgescheuert werden.
Die Filmspulen stehen etwa 10 mm über den Rand damit man sie leicht greifen kann.
Das Gehäuse ist außen abgerundet und ohne Ecken oder Kanten oder Ausnehmungen damit sie leicht in die Hosentasche gesteckt werden kann ohne zu haḱen.
Die Box ist in vier verschiedenen Größen für zwei, drei, vier oder fünf Filmspulen modelliert. 
Ebenso ist eine kleine Schablone dabei für die runden Ecken um das Velour zuzuschneiden.
Gedruckt mit PLA ohne besondere Einstellungen.
…………………………..
Box for the Nikon AM-1 reloadable film spools and/or for the Nikon F film spools without their containers.
The inside of the box is dimensioned accordingly to be lined with velour (DC-Fix velour) so that the film spools do not rattle or get rubbed off.
The film spools protrude about 10 mm over the edge so that they can be easily gripped.
The housing is rounded on the outside and has no corners or edges or recesses so that it can easily be put in your pocket without being caught.
The box is modeled in four different sizes for two, three, four or five film spools.
A small template is also included for the rounded corners to cut the velour.
Printed with PLA without any special settings.

Tagi