Split-Flap connectible UnitFrame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This connectible UnitFrame makes it possible to keep the Units stable and in place when used without the original frame
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 503
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
While planning this project I wanted to put the split flap display in a wooden frame. In order to organize my units I wanted them connected very firmly so I can carry them around without the fear of falling apart. Also I wanted it to be separate easily if I need to replace one.
The result was the modification of the UnitFrame. In order to connect two frames you need:
- M3 square nut
- M3x8 screw
- 10x4 connector (printed)
As the 10x4 connector is a tolerance piece please print some variations at 96% 98% 100% scale to see which fits best with your printers tolerance.