Hot and Cold pipe marking and pipe spacers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To easily identify Hot and cold water pipes during house restoration and also having two sets of pipe spacers.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
During the kitchen restoration I have been worried I would make a simple mistake and mix up hot and cold water pipes.
This small set of clips helped me to make sure I don't du such a silly mistake.
Further more I wanted to maintain parallel gap between pipes and as I'm not plumber by trade and lucking the skills and experience I have created a small aid to help me with achieving decent finish on my pipework.
These clamps are designed to fit standard 15mm copper pipes.
I have made them from PETG and that is also the material I recommend to use as bare minimum.
DO NOT USE PLA on the hot water pipe.