1 / 5
Voronoi Star
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
This voronoi star was made as a Christmas tree topper but can serve as a general decoration too.
You can tweak the optional tree connector dimensions in fusion360.
Merry Christmas!
Printing Information:
- Print the model on its back (laying flat), it was slightly flattened for this purpose.
- Use tree support to support the voronoi structure. You can get away by only supporting the critical regions.
- Use a brim, since its contact surface with the printbed isn't all that much.
- (if wanted) print the optional tree connector on its head (ellipse)
- (if wanted) print the voronoi optional tree connector on its base (circle) with tree supports on critical regions.
---
Erratum (22/12/24): Addition of an optional tree connector to accommodate more tree diametres
Erratum (23/12/24): Addition of the default “optional tree connector” in voronoi style