Xmas Snowflake Tree
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brick system compatible xmas tree for decoration.
- Ocena
- 5 / 5
- Polubienia
- 258
- Pobrania
- 374
- Wydruki
- 7
- Wyświetlenia
- 1900
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This time, I’ve prepared a tree kit. Each tier is based on the design of my previous snowflake model, so it is again compatible with yout brick system or similar building systems. I managed to calibrate my own printer better, and now the print is more accurate, making the result compatible without scaling adjustments (Compared to the previous snowflake model). However, if the compatibility isn’t ideal, I recommend using the calibration plate to check the stud size and adjusting the global scale if necessary. The tree can also be decorated with some brick elements and similar items.
If the tree feels unstable, I suggest printing more round bricks to create a thicker trunk in the bottom part. I attached the round bricks separately and also second version with more tunk pieces.
I printed it using PLA, with a layer height of 0.2 mm, without supports, and without a brim.