Body Glove Boogie Board Strap Bracket for back
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My cousin somehow managed to lose the back bracket for the strap on my boogie board. I decided to model this to replace
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
My cousin lost the original part. Fusion unfortunately does not have the right thread and I am lazy so the thread does not fit too tight. However this is does not matter when you tighten it properly as it ends up working alright. I printed in PETG with 100% infill and it is not causing any problems for me. 25% infill is probably also strong enough, I just wanted to stay on the cautious side. If there is enough interest I may model the other part of it that attaches to the strap.
Recommended profile:
PETG, ABS/ASA, CF materials.
0.2m layer height
25% - 100% infill - more the stronger
4 walls, 5 top + bottom