1 / 9
Remixed Annoying Gift Box by LittleCoolBomb - sized in mm, separate lid, support-free print
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed the Annoying Gift Box by u:LittleCoolBomb: sized in mm, separated the lid from the threaded tie segment.
- Ocena
- 4,571 / 5
- Polubienia
- 206
- Pobrania
- 1470
- Wydruki
- 4
- Wyświetlenia
- 9316
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 4) (Komentarze: 18)Remiksy (0)Kolekcje (244)Powiązane
Remixed the Annoying Gift Box by u:LittleCoolBomb:
- sized in mm.
- separated the lid from the threaded tie segment.
- provided split bow for easy, support-free printing.
- added clearances of 0.3 mm for the tie segments.
- provided a faster printing, slimmer walled box with more storage room inside.
- may need to use rafts for the screws because it has significant overhangs that will curl up if printed in silk PLA.
Category: Puzzles