Dutch houses 1:87 H0 scale - Nijverheid 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dutch working class neighborhood with a century old houses in 1:87 H0 scale intended for a model train scene.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 169
- Wydruki
- 0
- Wyświetlenia
- 691
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a set of a century old Dutch working class terraced houses I created in 1:87 H0 scale intended for a model train scene. This is a variant of my ‘Nijverheid 2’ with a shed behind the houses.
The model is best printed with a 0.25mm nozzle.
I printed the parts in the following batches:
Batch 1 - Walls and chimneys. 0.25mm nozzle 0.15mm layers.
- 2 x Nijverheid 3 Front Wall.stl
- 2 x Nijverheid 3 Back Wall.stl
- 2 x Nijverheid 3 Side Wall.stl
- 3 x Nijverheid 3 Chimney.stl
Batch 2 - Roof backside. 0.25mm nozzle 0.15mm layers.
- Nijverheid 3 Roof backside left.stl
- Nijverheid 3 Roof backside middle.stl
- Nijverheid 3 Roof backside right.stl
- 2 x Nijverheid 3 Roof ridge 91.5.stl
- 2 x Nijverheid 3 Roof ridge 95.75.stl
Bacth 3 - Roof frontside. 0.25mm nozzle 0.15mm layers.
- Nijverheid 3 Roof frontside left.stl
- Nijverheid 3 Roof frontside middle.stl
- Nijverheid 3 Roof frontside right.stl
Batch 4 - First floor and roofgutter. 0.25mm nozzle 0.15mm layers.
- 2 x Nijverheid 3 First floor and roofgutter end.stl
- Nijverheid 3 First floor and roofgutter middle.stl
Batch 5 - Doors, Windows and Loft conversions. 0.25mm nozzle 0.15mm layers
- 4 x Nijverheid 3 Front door left.stl - This is at the frontside seen from left to right for house 1, 3, 5 and 7.
- 4 x Nijverheid 3 Front door right.stl - This is at the frontside seen from left to right for house 2, 4, 6 and 8.
- 8 x Nijverheid 3 Kitchen window.stl
- 8 x Nijverheid 3 Window back side.stl
- 8 x Nijverheid 3 Window front side.stl
- 3 x Nijverheid 3 Loft conversion back side.stl
- 4 x Nijverheid 3 Loft conversion front side.stl
- 3 x Nijverheid 3 Window loft conversion back side.stl
- 4 x Nijverheid 3 Window loft conversion front side.stl
- 4 x Nijverheid 3 Window side wall.stl
Batch 6 - Shed. 0.25mm nozzle 0.15mm layers
- 4 x Nijverheid 3 Shed roof.stl
- 4 x Nijverheid 3 Shed walls.stl
Batch 7 - Floors 0.40mm nozzle 0.20mm layers
- 2 x Nijverheid 3 Floor end.stl
- Nijverheid 3 Floor middle.stl
Batch 8 - Interior walls 0.40mm nozzle 0.20mm layers
- 3 x Nijverheid 3 Interior wall downstairs.stl
- 3 x Nijverheid 3 Interior wall upstairs.stl
- 2 x Nijverheid 3 Interior wall full height end.stl
- 2 x Nijverheid 3 Interior wall full height middle.stl
Building the model:
1. Glue the two 'Floor end' parts on each side of the 'Floor middle' part.
2. Connect the two 'Front Wall' parts, and connect the two 'Back Wall' parts. Take care to keep everyhing aligned.
3. Place the front walls, back walls and side walls around the floor.
4. Place the interior walls in the following sequence: Interior wall full height end, Interior wall downstairs, Interior wall full height middle, Interior wall downstairs, Interior wall full height middle, Interior wall downstairs, Interior wall full height end.
Use the 'First floor and roofgutter end' and 'First floor and roofgutter middle' parts to correctly align the walls. Check the photos for the correct orientation.
(Do not glue the 'First floor and roofgutter' parts for easy access later).
5. Place the doors and windows in the appropriate places. Mind the correct orientation of the doors (see photos).
6. Connect the three 'Roof backside' parts, and connect the three 'Roof frontside' parts.
7. Put the roof together. Place the 'Interior wall upstairs' parts EXACTLY between houses 2-3, 4-5 and 6-7.
8. Place the roof ridges and chimneys in the following sequence: Roof ridge 95.75, Chimney, Roof ridge 91.5, Chimney, Roof ridge 91.5, Chimney, Roof ridge 95.75.
9. Place the windows in the loft conversions. Mind the correct orientation of the windows (see photos). Place the loft conversions on the roof.
10. Place the roof on the houses. (Do not glue the roof on the house for easy access later).
11. Connect the 'Shed walls' parts to the smooth surface on the backside walls. Place the 'Shed roof' parts on the walls.
Happy printing.