1 / 4
MiSTivus The MiSTer Pi Base Kit Case For The Rest Of Us — zdjęcie 1
1 / 4

MiSTivus The MiSTer Pi Base Kit Case For The Rest Of Us

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed to fit the base kit with ram module and fan board installed, utilizing the included screws and standoffs

Ocena
0 / 5
Polubienia
2
Pobrania
38
Wydruki
0
Wyświetlenia
197
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Share Alike

Designed for the Retro Remake/Taki MiSTer Pi base kit with the fan board and ram module installed.  I couldn't find a case specifically for just the bare minimum needed to utilize all the cores. Since I don't have a collection of retro controllers and displays the added features of the mega pack weren't really needed for me personally.

  • To install the boards assemble the stack as instructed in Taki's startup video but use the short standoffs on top rather than the screws.
  • Insert stack into box and align with holes
  • Insert and tighten the screws from the bottom to secure the boards

Printed on my Elegoo Neptune 4 Plus

  • 0.2 Layer height (0.3 initial layer)
  • 4 walls (enough for walls to be solid)
  • infill 10% (doesn't matter because ^)
  • Supports not required but use if needed (you know your printer better than I do) 

 

Tagi