1 / 1
Chinese New Year Schlüsselanhänger + Ornament — zdjęcie 1

Chinese New Year Schlüsselanhänger + Ornament

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Chinese New Year Schlüsselanhänger + Ornament

Ocena
0 / 5
Polubienia
1
Pobrania
18
Wydruki
0
Wyświetlenia
98
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Wenn euch meine Arbeit gefällt, würde ich mich über euren Support freuen, damit alle Inhalte kostenfrei bleiben.

Buy me a Coffee …
Ko-Fi … https://ko-fi.com/lagnor69
Pay Pal … https://www.paypal.com/donate/?hosted_button_id=7XBNU8XD2XFAE

--------------------------------------------------------------------------------------------------------------

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50x50mm and 132x132mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Kingroon Red Transmission Distance: 4.2
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #15 (1.28mm) swap to Yellow for the rest.

Tagi