Clips to Attach Yeti Bottle Sling for Rambler Bottles to Luggage for Travel/Airport
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2 Clips used to attach Yeti Bottle Sling for Rambler Bottles to the handle of a rolling/spinner Bag Handle.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 1
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple clips that insert into the straps of the Yeti Bottle Sling for Rambler Bottles and attach it to the handle bars of a roller bag or spinner bag. Great for in the airport. Keeps your water secure and within easy reach. Pops off quickly for security screening and then right back on again for use in the airport. Can still use the sling with the shoulder strap even with the clips in place. Works on Hanke and Tumi bags, likely many others. Some bags may need the clips to be resized in the slicer.
Assembly:
- Print 2 clips for each sling: Top clip should be printed slightly smaller so the sling stays at the top of the handle bar above one of the sliding joints. You may need to play around with different sizes to find the one that works for your bag.
- Remove the clips that come with the sling by lifting the strap on the side a bit and sliding them out. Replace the clips with the two printed clips.
- Pull the luggage handle up, slide the clips on from the side.
PLA works great, any infill, no supports. Use at least 3 walls on all sides to ensure strength.
Fits either size of Yeti Bottle Sling for Rambler Bottles:
https://www.amazon.com/YETI-Bottle-Sling-Rambler-Bottles/dp/B09RN64678?th=1