1 / 1
Coaster Orientale Nr 5 MMU; 80mm and 100mm Version
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed the Coaster Face down for a smoth Surface with MMU. I made it 3mm thick and 80mm and 100mm Diameter.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
Load the Ornament file with add Part in to the Slicer it should then fit. After that, turn the objekt face down to the Printbed and Print it.