AMS lite spindle to Sunlu 1kg spool adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AMS lite spindle to Sunlu 1kg spool adapter is for the V1 black Sunlu Filament spools
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
BBLamsL_Sunlu_Spool Holder v2
Use on any AMS lite. This has a tab included to prevent original spindle from slipping out. The tab has a 5mm gap of play so you can push the original spindle out and twist using the gap for finger grip which helps slip the original spindle out easier. If you want v1 with no tab let me know and I can put the file up. V1 is not recommended for top mount AMS Lite
*.20mm Standard for quality.
Standard settings for Generic PLA filament use should be just fine.
Enable support. Use defaults. Do NOT check "On Build Plate Only"
On the P1P, approximately 62g of filament is used. Total time 1h43m stock settings.
On the A1, approximately 57g of filament is used. Total time 2h26m using stock settings.
USE ALIGNED SEAMS.
Disassembly of the original Bambu spool holder is easy but be careful popping the spring loaded tabs out. I am not responsible for damage you caused. I have never had an issue popping them out and fit in the adapter is not a snap fit. I swap back and forth often and have had no issues. Assembly is in the pictures
This will only work on the black PLA spools, possibly the PLA+ but Sunlu now has a v2.0 which I see is using the blue spool like the meta filament which are smaller than the SunLu black colored spools, and larger than the BambuLab spools.
For Version 2 (darker blue) Sunlu spools I recommend this one but there are others https://makerworld.com/en/models/734581?from=search#profileId-666412