Knife Hands for Dummy 13
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Knife hands for closed fist on Dummy 13-Version 1.0.
- Ocena
- 0 / 5
- Polubienia
- 90
- Pobrania
- 460
- Wydruki
- 0
- Wyświetlenia
- 1749
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Share Alike
This was sort of inspired by the terminator T-1000 from Terminator Judgement Day, and Bumblebees knife hands from Transformers 1.
For print settings:
I would recommend a .08mm layer height (or however fine your printer can handle).
Yes supports, I prefer tree and using a Top Z Distance of 0.15mm so the supports can come off easier
Printing them thumb-side up as shown in image 7 because the tips of the blades are too thin to print when pointed upright. I have found that this is the easiest way to print for quality, and ease of support removal.