The Regulator. Antman belt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a project I worked on last year but never got around to finishing in time.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 815
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a project I worked on last year but never got around to finishing in time. We were going to do a project run on theRPF but it took so long to get the 3d printed parts ready for casting that it was clear that this just wasn't going to happen after the changes were made to his belt and suit in the last movie, combine that with the cost of making the molds and the project flopped.
However it may still interest some of you, and if you want to try your hand at making your own then be my guest!
Print instructions
Category: Props How I Designed This
Designed in Autodesk Fusion360. Using accurately scaled pictures of the hero prop. This is a 1:1 model. The parts were designed by me, and the back piece was designed by Adrian Gonzalez.
We are NOVA PROPS.