Plaster wall guard for Vogel's TV Mount 3665
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This will prevent the metal pivot from hitting your delicate plaster wall and damaging it over time.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Share Alike
This will protect your stucco from the rotatable TV Mount's pivot
Vogel's COMFORT TVM 3665 TV Mount (EAN 8712285351860) has one small issue. The metal pivot will bump into the plaster wall (if you are not very careful), and it will damage the stucco over time.
Such damages will not always stay invisible behind the TV when your TV mount is rotatable and extendable.
Unfortunately, it is not possible to use self-adhesive bumper protectors directly on this rotating pivot due to its cylindrical shape. Also, the adhesion is not strong enough to withstand rotation.
Sticking a self-adhesive protector pad directly on the wall is also not an option, as it could irreversibly damage the stucco, especially if the stucco is painted over.
I created this 3D-printable model to help solve that problem, so that self-adhesive bumper protectors can go on the plastic plate. In my experience, it seems to work (see the pictures).
It's easily removable. However, on the negative side, the gap between the wall and the TV increases by about 4 mm.
Aesthetically, my design is not the best (minor visual inconsistencies exist), but gets the job done.
You need one or two self-adhesive bumper protector pads.
May work with other rotatable TV mounts too, if the dimension of the arm roughly matches 76.4 mm x 26.4 mm.
Original design on TinkerCAD by me: https://www.tinkercad.com/things/7nlhHknO0tP-plaster-wall-protection-for-vogels-tvm-3665-tv-mount (if the link is not working, it's still pending review)